Spacious desk12/31/2022 ![]() ![]() This will take some time and elbow grease, so again, I recommend using your drill as a driver to make things go a lot faster. Attach everything, including the leg brackets, except for the legs themselves. This is critical: If you just start screwing into the surface, you’re likely to split the wood. ![]() Once you’ve found a place for everything, mark and drill some pilot holes for the legs, anti-sag braces, and anything else you’re attaching to the underside. Planning everything out will ensure you won’t run into many problems as you build. If you plan on incorporating that filing cabinet, it will replace one of those front legs. I recommend one leg in each of the four corners, with a fifth one in the center of the back edge for support. When your slab is ready, flip it upside down and plan out your build, starting with the legs. If you’re going to be using your desk a lot, you’ll want it to be comfortable. Write it down, and buy the drawers if you plan to include them. The resulting measurement is the setting you’ll want for your OLOV legs, as well as the ideal height for your filing cabinet or drawers. Once you’ve got your position just right, measure the distance from the floor to the top of the arm rests, and then subtract the thickness of your surface-usually about an inch and a half. Your feet should be flat on the ground, with your elbows and knees at approximate 90-degree angles. Grab your desk chair and adjust the seat height and arm rests to a comfortable position. While you’re waiting for the door to dry, do a little ergonomic experimentation. In this project, I’m going to mix the sleek look of the latter with the ergonomics of the former to get the best of both worlds.Īpplying stain can be relaxing, but make sure you’re working in a well-ventilated area-the fumes can become overwhelming.
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |